Tuesday, June 4, 2013


 Introduction to Triathlon
If you’re new to the sport of triathlon, no matter what your background, don’t be intimidated by what’s ahead of you. We all started as beginners! So here’s a rundown of what to expect and how to plan for your first triathlon. 

Triathlon Race Distances
Sprint Distance is 750 meter swim, 12 mile bike and a 5k run
Olympic Distance is 1500 meter swim, 24 mile bike and a 10k run
Half Ironman Distance is 1.2 mile swim, 56 mile bike and a half marathon (13.1 miles)
Ironman Distance is a 2.4 mile swim, 112 mile bike and a marathon (26.2 miles)
The best way to start out in triathlon is to pick a sprint distance race. Try not to get carried away and sign up for an Ironman as your first tri. Ideally you want to get experience in the other distances and get comfortable with what it takes to complete one. 

Training & Gear
You don’t necessarily need to buy all new gear when starting out in triathlon (unless you want to, of course. Shopping is fun, right?). You may be able to get by with what you already have.
The necessities are:
Bathing Suit (or tri clothes) & Goggles
Towel (for your transition area)
Bike & Helmet
Sunglasses (to protect your eyes, especially while cycling)
Sneakers
Water bottle

Remember that the key to training is consistency. Sounds almost too simple, but it really does make a difference in the long run.
When you start training, build up gradually. More is not always better, so follow a good plan, be sure to have a recovery week every 2-3 weeks and take one day off completely every week. Recovery and adaptation from training is just as important as the training itself.
Besides swimming, biking & running there are other types of workouts you can include in your training:

Strength, Yoga & Pilates 
Swimming, biking and running can lead to imbalances. By including strength, corrective exercises, yoga or pilates, we balance out our bodies by loosening up what’s tight and strengthening what’s weak.
Bricks

To get accustomed to the feeling of running off the bike, it’s important to include bike/run bricks in your training, which is a bike ride followed immediately by a run. Race day is not the first time you want to be dealing with that strange heavy leg feeling!
Transition practice

Transitions are not something you want to ignore in your training. It’s the best way to get “free speed”. By being calm and efficient it’s easier to get your transition times down compared to the work that’s required in getting faster in swimming, biking or running.
Pre-Race
Before the race, you’ll want to make sure everything is in good working order.
A pre-race tune up for your bike is always a good idea (no one wants a mechanical breakdown in the middle of their race!), but at the very least you should check your tires, gears and lube your chain.
Check that your goggles aren’t all scratched up and make sure you have a decent pair so you can see clearly during the swim. It’s always good to bring an extra pair with you to the race, just in case either you need it or a fellow triathlete needs it. Karma goes a long way!
Race Day
On race day, you want to give yourself plenty of time to set-up and warm-up before the start. You’ll be picking up your number (unless packet pick-up is available the days preceding the race), setting up your transition area, getting body-marked (that’s where they write your number on your arm and age on your calf), and of course visiting the porta potty (everyone’s a little nervous on race day, so there will be a line).
Always remember “nothing new on race day”. Race day is not the time to try a new nutrition product or new gear. That’s what training is for.
Happy racing!
--------------------------------------------------------------------------------------------------------------------------------------
Joan Scrivanich is a USA Triathlon and USA Track & Field Certified Coach in New Jersey. Her background is in Exercise Physiology with a graduate degree from Columbia University and she has been an endurance athlete for over 20 years. Find out more about Joan at www.TriCoachJoan.com and follow her at www.twitter.com/TriCoachJoan and www.facebook.com/TriCoachJoan

Tuesday, May 14, 2013

Run Stronger & Longer While Staying Injury Free

Today, we have guest blogger, Chris Kaplanis, co-owner and coach for Ridgewood TriAthlete based in Ridgewood, NJ writing about running form and technique!

Learning and practicing proper run form and developing run economy will serve all endurance athletes well.  Beginner to professional – this is one of the best ways to run stronger and longer while reducing the risk of injury. 

Most athletes new to the endurance arena, namely runners and triathletes, overlook or discount the importance of learning the fundamentals of running.  I suspect this may be the case for several reasons, but quite simply, humans are land animals.  When we want to run, we run.  Unlike swimming, where proper form has a major impact on forward movement and successfully swimming, you can easily fudge running for at least a mile or two.

While running a couple miles is great for most people, if endurance events (10k, Half Marathon, Triathlon, ect) are what you’re interested in, the first couple miles are usually just the warm up.  As athletes train to run longer and/or faster, form and economy play an increasingly important role.

And remember, run related injuries affect 60-65% of runners each year and are by far the most common among endurance athletes.

Below we will go through the basics of proper run form as well as touch on 3 vital components of improving your run economy.

Proper Run Form & Economy

The biomechanics of running is the form component of running and good running biomechanics improves speed and helps prevent injury.  Proper form enables running to be more enjoyable and helps improve your economy allowing you to run longer and stronger while helping to reduce the risk of injury.  In other words, proper run form and economy will increase your body’s “miles per gallon” allowing you to go further using less energy.

Runner’s World has a great introductory breakdown of Perfect Run Form, which is a great place to familiarize yourself with how you should look.  However, knowing how you should look and how you actually look is where a coach or friend can be a big help.

A few items I’d like to point out that the Runner’s World article doesn’t quite touch on include where your feet should fall, cadence and vertical oscillation.

Where do your feet land?  Your foot should land underneath you as opposed to out in front of you.  By landing each foot fall under your center of gravity you will naturally be more like to land on the forefront of your foot.  The forefront of your foot is between your toes and heal, specifically right between the “knobs” of your foot.  This is the ideal place to land.  By landing here your body will absorb the force exerted on each leg much more efficiently.  If you only run a few miles a week you may never experience the consequences associated with heal striking, however, as you increase your mileage the risk of injury goes up.

TEST 1: Jump straight up in the air, about a foot off the ground, and land on your heels. OUCH! This is essentially what your body is absorbing with each stride you take when running if you’re a heel striker.

TEST 2: Take off your sneakers and try running 100 yards.  You’ll probably notice that you naturally land on the forefront of your feet as you run; absorbing the force your body creates quite nicely. NICE!

Additionally, as a heel striker you’re essentially putting on the breaks each time your foot lands.  Think about this for a second… if you run this way, each time your foot hits the ground your heal digs in and essentially breaks or slows a lot of the forward movement you’ve created.  Not only that, but instead of going instantly into your next step you have roll from your heal to the forefront of your foot to push off for your next step forward.  Needless to say, this is not very efficient.

What is run cadence?  Run cadence is the number of steps per minute an athlete takes while running.  Cadence is typically measured by the number of times ONE foot hits the ground over a minute.  Similar to cycling cadence, as you run, you should strive for a cadence of about 90.  You may have noticed many elite marathoners appear to float along as they run, barely touching the ground and at a cadence in the high 90’s this is no surprise. 

Run cadence is important for a couple reasons. 

First, the higher your cadence the less amount of time your foot is on the ground.  The less time your foot is on the ground, the less impact your body absorbs with each stride.

Second, cadence is the same as stride rate and stride rate multiplied by stride length equals speed. 

Stride Rate x Stride Length = Speed

Most untrained athletes run at a cadence of about 80.  Anyone can have a high cadence when sprinting or running fast, but most cannot sustain that pace.  The trick here, is learning to increase your cadence (or turnover) when running slow or at a comfortable pace so that your heart rate does not spike.  This takes practice and patience, but if you are diligent it WILL PAY OFF.  Not only will your body thank you, but if you can increase your cadence by 5 while holding your HR steady, you’ll be able to knock off 2 minutes (or more) over 10k (6.2mi). 

You can easily check your cadence by counting the number of foot falls over :15 seconds and multiplying that number by 4.  Manually counting is a great place to start, but I often find this to be a misleading way to check your cadence.  When athletes count their steps manually, more often than not they’ll hit the target of 90 even if they’d normally never come close.  As a result, I do believe this is a good method of training yourself to run at the proper rate, but in terms of checking and monitoring cadence I prefer using Garmin’s foot pod, which counts for me.  This way there’s no cheating.

Another great tool to use while learning to run at a 90 cadence is a metronome.  You can set the device to beep at 180 beats per minute.  Each beep will represent a foot fall.  I recommend running with it on first a few times and then alternate turning if ON and OFF throughout your run to “check in” to see if you’re holding a 90 cadence.  Remember, it is important to practice this while running at a slow comfortable rate.  You must avoid increasing your pace in order to hit the proper cadence.  The more you practice, the easier it will become.

What is vertical oscillation?  While watching people run it is not uncommon to see athletes run with a bounce or spring in their step/stride.  Vertical oscillation is the up and down movement that occurs with each stride.  While everyone will “bounce” slightly while they run, the goal is to reduce this as much as possible.  Too much bounce, wastes energy and decreases the distance forward with each stride. 

You can help reduce your vertical oscillation by trying not to lift your knee so much when running.  In order words, all your energy should be behind you, not in front of you.  Fellow USAT Coach, Kelly Wisolik does a great job at explaining this below.

“Lifting versus pushing is the concept that is better described as “muscling versus springing.” In distance running, an athlete does not want to “lift.” Lifting means “launching.” This involves a lot of muscular use as it requires power and strength to lift and launch forward. It’s good for power running like football and basketball players and track sprinters. But this extra energy expenditure is not advantageous for distance runners and triathletes. Lifting pulls the chest up and not only uses more muscles but more oxygen too! Lifting occurs when the stretch-shortening cycle is not effectively being employed during the running stride. Pushing is the idea of pushing off the extended leg during the running stride. Pushing is an effective use of the tendons and momentum. Dropping the knee, leaning forward and springing from extension engages the natural reaction of the Golgi Tendon. This conserves muscles and oxygen and therefore is good for distance runners and triathletes. This is the concept of “dab and push forward,” “drop and spring” and “lean and push” which reduces power loss unlike “lift and pull.””

While the description above is well written, sometimes is best to just pretend like you have a glass of water (or wine) on the top of your head and you’re trying not to let it spill.

Be Smart

Many athletes find it invaluable to seek out a local coach to take a look at your form (swim, bike and/or run) and help correct it.  Clinics offered by local run/bike shops and triathlon clubs are another option. Whether you’re looking to improve your economy and make you a little faster or if you’re mostly concerned with injury prevention, working on proper run form is well worth the effort.

Written by: Chris Kaplanis, Ridgewood Tri Athlete

Chris Kaplanis is a professional triathlon coach.  He is the Managing Director & a coach at Ridgewood Tri Athlete, a multisport coaching business and tri club located in NJ.  You can follow Chris on Twitter @ChrisKaplanis.  Find out more about RTA on Facebook: www.Facebook.com/RidgewoodTriathlete and on Twitter: @RTA_Nation.

Monday, February 11, 2013

I thought swimming was a "safe" activity? Part 1: Common Shoulder Injuries in Freestyle

Well, if you swim like your grandparent, then maybe.

When people think of swimming, thoughts of vacation and leisure tend to come to mind.  Such a gentle sport, or so you thought!
For the competitive or novice swimmer, the prevailing region of the body we treat is the shoulder.  In this blog, we'll be discussing the causes and solutions to help your shoulder pain while you swim.

What are the causes of shoulder injuries in swimmers?  As noted in the picture above, one of the most common stroke flaws resulting in shoulder pain occurs when the freestyler's hand crosses the midline of the body as the hand enters the water (should be in line with shoulder, not directly above the head or over).  This flaw is usually caused by an overrotation of the body and over time, can result in impingment of the shoulder, which is pain near the front or side of the shoulder when raising the arm to the front or side of the shoulder.  In addition, if the swimmer's core is not engaged particularly during breathing, that same overrotation of the body can result in the bottom hand drifting pass midline, causing more stress on the shoulder when the catch phase of the stroke is initiated.  Biceps tendonitis and rotator cuff tendonitis can also result from this type of hand entry into the water.  Another cause of shoulder pain occurs when a swimmer uses a straight arm pull instead of one with a bent arm, again causing a great deal of strain over time in the shoulder. 

Easy solutions-
-point it out to the swimmer!
-swim drills with hands at the 1 o'clock and 11 o'clock positions, aka, "superman" glide (should be able to see your hands in the periphery of your sight)
-work on hand entry, vertical forearm, and bent arm pull drills
-core drills in the water to keep your body in balance

Tuesday, January 8, 2013

Why DPTs Should Embrace and "Practice" Fitness

As you all know, Maven has always been about bridging the fitness and rehabilitation gap.  Although a steady number of rehab professionals are becoming like-minded, the vast majority of doctors of physical therapy continue to focus on addressing physical impairments or functional limitations through very rudimentary exercises and not the kind of functional strengthening that we, as the musculoskeletal experts, should really be incorporating into our plan of care. We seem to be stuck on exercises like biceps curls, mini squats, and straight leg raises; don't get me wrong, these exercises certainly have their place in the early stages of recovery, but need to be progressed before discharging a patient.

Simply put, patients separate rehab exercise from fitness or "gym" exercise as they are often not challenged enough by their rehab exercises and are looking to their personal trainers for a real workout, when in fact, fitness or strength goals and activities could easily have been weaved into their rehab visits with a physical therapist.

Why aren't more DPTs using the TRX suspension system or kettlebells instead of cable machines?  I thought that our profession has always been about restoring functional movement and strength?  Why isn't the Concept 2 rower a normal mainstay in all rehab facilities?  Are we still relying on passive care such as, ultrasound, joint mobilization, a quick rubdown, and e-stim?

If we, as DPTs, are truly concerned about wellness and prevention, which we tout in our profession, then why aren't we educating ourselves and our patients by discussing weight management, nutrition, and fitness?   Is it because we don't prioritize the after-care of our patients or are fixated on manual therapy?  The overall goal is to restore pain-free functional movement and prevent injury, as I wrote earlier.  If that's the case, then we should be offering sound advice and direction on how to achieve fitness goals in the safest, most efficient, and most effective manner.  Doesn't nutrition and food intake have a direct effect on healing, reducing joint stress, and pain reduction?  Doesn't creating a fitness plan transition towards discharge help our patients prevent injury and help reduce the burden on the failing healthcare system?

Physical therapists are one of the best positioned medical professionals to address movement impairments and provide safe and effective recommendations on exercise and weight management.  It's about time our profession steps up to the plate and fully embrace fitness as part of the rehab continuum...or else other professionals will continue to take it on and leave us in the dust with our ultrasound, e-stim, and passive manual techniques.